Lessons Learned from Years with Products

Rivet – The Fastener That Never Runs Old

There are now several fasteners for metals available, but rivet is considered to be the oldest form. Rivet has been present during the world war 1 and 2 which is used to construct boats and airplanes. Yet, you can still find rivet in the market today.

In the past, building ship and other iron structures like bridges require the use of hot rivets. Joining two pieces of either iron or steel using rivet is done once the rivet is heated that it turns into red hot. There are two persons who need to do the process and one man should hold the rivet in the right place while the other one on the other end and hit it to blind the rivet over the hole. As the rivet cools down, it will start to contract that pulls the two pieces tighter together.

The heat and hammering present in the process can be very complicated and dangerous. To get the hot rivets come with complications. Are you familiar with the skyscrapers building in New York back in 1920’s? You couldn’t imagine how hard it is to to get hot rivets on a very high level.

Today, rivets are now called cold rivets which are small in size. Ships ensure that the steel hulls are strongly welded together for quicker construction. The fasteners are now being used in constructing bridges.

One of the good things with cold rivets is that they can be used at any project at home without professional skills on how use it. Visit your nearest DIY store and you will sure find a pop riveting kit. Through the hole, the pop rivets are put attaching the gun and a moderate pressure allows the rivets to tighten itself. The excess part will be cropped off by the riveting gun.

Today, these rivets are still in use in the aircraft industries. For several years already, rivets have been a very useful tool to fasten and hold pieces together.

All of these just show how rivets are able to withstand the test of time.

For different times, rivets tools have been a good choice when it comes to fixing and holding things together. This made fastening things possible even where welding is not applicable. You can use rivets when joining a plywood with metal sheets. Rivets are perfect for materials that are easy to deform. There are sure different sizes of rivets available on the market.

Rivets are known for its different level of strength which made most industries to prefer to use it for different purposes. Nowadays, there are also several rivet manufacturers that are producing quality fasteners. Rivets are known for its accessibility, cost and strength.

Source: rivet

Leave a Reply